1300 698 873
OUR QUOTATION WILL INCLUDE FREIGHT & GST
DELIVERED TO YOUR DOOR.
DELIVERED TO YOUR DOOR.
CO-EXTRUDED DECKING
Enduradeck co-extruded, dual layer decking is suitable for high traffic areas. The protective outer shield layer is highly stain, mildew, scratch and fade resistant. Dual colour boards have 1 colour each side. Double the choice.
WALNUT / TEAK
|
IRONBARK / GHOSTGUM
|
GRAPHITE / MAPLE
|
OAK / DRIFTWOOD
|
BEECH / CORAL
|
IRONBARK / GHOSTGUM
|
WALNUT / TEAK
|
GRAPHITE / DRIFTWOOD
|
FASCIA/SCREENING
All Co-extruded colours - 98mm x 12mm x 5400mm
$6.98 l/m - $37.70 Per board
(inc GST)
COMPOSITE CLADDDING & FENCING
TEAKFencing - Cladding 219 x 26
3.6 m size length $46.62 inc GST 4.2 m size length $54.39 inc GST |
GRAPHITEFencing - Cladding 219 x 26
3.6 m size length $46.62 inc GST 4.2 m size length $54.39 inc GST |
DRIFTWOODFencing - Cladding 219 x 26
3.6 m size length $46.62 inc GST 4.2 m size length $54.39 inc GST |
WALNUTFencing - Cladding 219 x 26
3.6 m size length $46.62 inc GST 4.2 m size length $54.39 inc GST |
EXTERNAL ANGLE
3.6 m size length $24.90 inc GST |
L ANGLE
3.6 m size length $12.20 inc GST |
CO-EXTRUDED DECKING TILES
Our decking tiles are engineered for durability and practicality, requiring little to no maintenance.
With nationwide delivery covering every postcode across Australia, your dream outdoor haven is just a click away. Just click them together like pieces of a puzzle, and you'll have a stunning outdoor surface ready to enjoy. It's DIY at its finest – a hassle-free transformation for all.
Available in three colours with matching fascia boards, available in 1.8m lengths.
With nationwide delivery covering every postcode across Australia, your dream outdoor haven is just a click away. Just click them together like pieces of a puzzle, and you'll have a stunning outdoor surface ready to enjoy. It's DIY at its finest – a hassle-free transformation for all.
Available in three colours with matching fascia boards, available in 1.8m lengths.
IRONBARK300 mm x 300mm x 20mm
$6.95 EACH or $76.45 PER SQM |
GRAPHITE
300 mm x 300mm x 20mm
$6.95 EACH or $76.45 PER SQM |
DRIFTWOOD
300 mm x 300mm x 20mm
$6.95 EACH or $76.45 PER SQM |
FLAME PROTECTION SOLID BOARDS
COLOUR RANGE
Driftwood, Teak, Ghost Gum,
Graphite, Walnut & Iron Bark
Please confirm if you require a BaL Rated Product.
FREE SAMPLE OR ENQUIRY
Decking
|
Screening
|
* Standard board lengths are 5.4mt.
Easy To Install
Starter Board
The first board laid on your new deck is referred to as a starter board. Enduradeck "C" clips are used for starter boards. The "C" clip allows you to accommodate the required 5mm distance from the wall/structure.
|
Hidden Fixing
The Enduradeck boards are designed to be used with our ABS Plastic hidden clipping systems. The clips will guarantee a consistent gap between the edges of the boards. Each floor joist requires 1 clip per board.
|
Fascia
Using the Enduradeck fascia is an ideal way of finishing the edges of your new deck. Pre drilling of the fascia is required prior to fastening. Enduradeck Fascia is available with a brushed finish in all decking colours
|
Joining Clips supplied with either Timbertek or Metaltek screws. Please advise when ordering.
For More Installation Instructions
CLICK HERE
CLICK HERE
Please include an extra 5% wastage for all orders.
Only solid profile boards are suitable for commercial applications.
Only solid profile boards are suitable for commercial applications.
Please allow a fall on your deck to help prevent pooling and/or water staining.
Recommended, 300mm clearance from ground level (soil) to prevent distortion and cupping.
Decking can be laid on concrete less than 300mm clearance if drainage is adequate.
Recommended, 300mm clearance from ground level (soil) to prevent distortion and cupping.
Decking can be laid on concrete less than 300mm clearance if drainage is adequate.
Builders plastic can be installed under deck when clearance is less than 300mm. Please ensure area is free draining and well ventilated.