|
|
FREE SAMPLE PACK
Call 1300 698 873
Prices Include Free Delivery*
All Capital Cities And Most Areas Of Australia
|
100% Recycled product - Low Maintenance.
Termite resistant - No Oiling Required. |
Made with eco-friendly materials
Anti slip - Invisible Fixing - Easy Installation. |
CO-EXTRUDED DECKING
CALL OR EMAIL TO PLACE YOUR ORDER
PAYMENTS CAN BE MADE WITH CREDIT CARD OR DIRECT TRANSFER
Enduradeck co-extruded, dual layer decking is suitable for high traffic areas. The protective outer shield layer is highly stain, mildew, scratch and fade resistant. Dual colour boards have 1 colour each side. Double the choice.
Walnut / Teak
|
|
Iron Bark / Ghost Gum Solid
|
Graphite / Maple Solid
|
FASCIA/SCREENING
Available in Maple, Graphite, Walnut, Teak, Ghost Gum, Iron Bark.
71mm x 10mm x 5400mm
$6.24 l/m - $33.68 Per board
(inc GST & Delivery*)
WOOD PLASTIC COMPOSITE DECKING
Enduradeck Wood Plastic Composite is manufactured from a combination of recycled plastics, wood waste and adhesive resins. WPC is extremely resistant to harsh weather conditions as well as being eco-friendly.
COCOA
|
MOCHA
|
SLATE GREY
|
MOCHA SOLID
|
SLATE GREY SOLID
|
FASCIA/SCREENING
Available in Cedar, Slate Grey & Mocha.
95mm x 12mm x 5400mm
$5.26 l/m - $28.41 Per board
(inc GST & Delivery*)
Only solid profile boards are suitable for commercial applications.
Decking
|
Screening
|
* Standard board lengths are 5.4mt.
Screening / Fascia
95mm x 12mm
Available in 2.7mt ,1.8mt and 5.4 lengths. |
Benefits of Enduradeck composite screening / Fascia.
|
Easy To Install
Starter Board
The first board laid on your new deck is referred to as a starter board. Enduradeck "C" clips are used for starter boards. The "C" clip allows you to accommodate the required 5mm distance from the wall/structure.
|
Hidden Fixing
The Enduradeck boards are designed to be used with our ABS Plastic hidden clipping systems. The clips will guarantee a consistent gap between the edges of the boards. Each floor joist requires 1 clip per board.
|
Fascia
Using the Enduradeck fascia is an ideal way of finishing the edges of your new deck. Pre drilling of the fascia is required prior to fastening. Enduradeck Fascia is available with a brushed finish in all decking colours
|
Joining Clips supplied with either Timbertek or Metaltek screws. Please advise when ordering.
For More Installation Instructions Click HERE
|
Gapping Requirements;
Between Boards - Side by Side. - 5mm Board End to Solid Structure. - 10mm Against Wall - Parallel. - 10mm End to End Butt Join - Cold Day. - 7mm End to End Butt Join - Hot Day. - 5mm Butt Join to Breaker Board. - 5mm |
Maximum Joist Distance Must Not Exceed;
Hollow Profile boards - 350mm Centres for Domestic. Solid Profile boards - 400mm - 450mm Centres for Domestic. - 350mm - 400mm Centres for Commercial / High traffic areas. Co-Extruded boards - 400mm Centres for Domestic. |
Please include an extra 5% wastage for all orders.
Only solid profile boards are suitable for commercial applications.
Only solid profile boards are suitable for commercial applications.
Please allow a fall on your deck to help prevent pooling and/or water staining.
Recommended 300mm clearance from ground level (soil) to prevent distortion and cupping.
Decking can be laid on concrete less than 300mm clearance if drainage is adequate.
Recommended 300mm clearance from ground level (soil) to prevent distortion and cupping.
Decking can be laid on concrete less than 300mm clearance if drainage is adequate.
Builders plastic can be installed under deck when clearance is less than 300mm. Please ensure area is free draining and well ventilated.